Home > News > Content

Product Categories

Zhangjiagang City Zhangyun Machinery Manufacturing Co.,Ltd
Add:Xindong Road, Daxin Town, Zhangjiagang City, Jiangsu Province, China
Tel:+86-512-58376558
Fax:+86-512-58376989
Ph:+8613584478980
E-mail:yvonnechan@zyjxzz.com
Measures Taken By Cross Wedge Rolling Die During Stamping Trimming
Jan 05, 2018

In order to prevent this phenomenon of cross wedge rolling die, we can take the following measures to control:

1. Iron filings are produced at scrap knife parts

Iron filings in scrap cutters are mainly caused by mold process. Take measures to: the upper die trimming waste blade before 10mm change shape, made to break the edge of the shape, and the next mold scrap edge milling.

2, the plate does not conform to the shape and the edge gap is unreasonable

The measure of the unreasonable of the plate and the gap between the edge of the blade: the OP10 drawing plate is used to fasten the parts of the mould, and to adjust the gap between the upper and lower edges and the depth of the feed.