Home > News > Content

Product Categories

Zhangjiagang City Zhangyun Machinery Manufacturing Co.,Ltd
Add:Xindong Road, Daxin Town, Zhangjiagang City, Jiangsu Province, China
Precautions For COTS In Use
Jan 05, 2018

1, the power-on heating, should check the silicone roll is normal turn, shutdown, should pay attention to set the temperature delay is normal, can not be directly off the machine (temperature delay is generally set at 40-50 minutes appropriate);

2, the machine in the work, such as in the event of a power outage, or other causes of sudden downtime, should immediately wear gloves, edge of the roll side of the roller to remove the heat dissipation, so as not to heat up the rubber roller;

3, replacement cots tight silica gel, should wait for the silicone heating to the required temperature and then lock the fixed, but not too tight;

4, silica gel roller should keep the surface clean, as far as possible to avoid transfer printing film debris, such as sticking to the surface of the cots, such as the surface has been contaminated, can be used cloth plus industrial alcohol for surface cleaning. If there are stubborn dirt can be polished with fine sandpaper.

5, as with other printing cots, silicone roll in the use or storage, not with other hard objects (such as wrenches) collision, Squeeze Bar, away from corrosive goods;

6, silicone temperature generally 190 degrees can be normal transfer, in the product transfer qualified, should minimize the pressure and temperature of the silicone roll.