Home > News > Content

Product Categories

Zhangjiagang City Zhangyun Machinery Manufacturing Co.,Ltd
Add:Xindong Road, Daxin Town, Zhangjiagang City, Jiangsu Province, China
Tel:+86-512-58376558
Fax:+86-512-58376989
Ph:+8613584478980
E-mail:yvonnechan@zyjxzz.com
Roll Forming Machinery - Used Mostly In Industry
Oct 04, 2018

Roll Forming Machinery - Used Mostly in Industry

In the manufacturing industry, this equipment is used to bend or form sheet metal to meet a certain profile. These machines make specified configurations from long strip metals that are commonly coiled steel. The needed cross-sectional profile is designed for the machine to bend or form is as specified. Other than roll forming, this machine performs the following tasks:

Roll punching

Material cutting

How the Roll Forming Machine Operates

The machine is fed with metal and at room temperature as it attempts to bend it with the aid of numerous stations. At these stations, the rollers direct the metal in order to achieve the needed bends. Each station strives to bend the metal more than the previous one. It is a progressive process that makes sure the desired cross-sectional design is met. The machine operates at a speed of thirty to six hundred feet every minute. Thus, they are well equipped to handle long metal pieces and large quantities of metal parts. They are a good fit for big metal forming companies.

They are good for bending and forming metals that need very little finishing work. The product in most cases is very detailed and finished excellently.

The Four Main Parts of a Roll Forming Machine Line

  1. Entry section- This is where the long metal strips are fed into the machine. It is the entry point for metal that is in sheet form or fed into the machine from a coil that is continuous.

  2. Station rollers- This is the main part of the entire roll forming process. As the metal strips make their way through the machine, the rollers bend and form the required shapes. The rollers are what drives the machine, thus it is a very crucial stage.

  3. Cut-off press- At this stage, the metal is reduced to a pre-determined length. It is common to find flying die cut-off techniques that march the speed of the machine.

  4. Exit section- This is the part where the product leaves the machine and is directed t a table or roller conveyor. This movement is manual and is used to inspect the product to make sure that it has met the requisite details.

If you have any doubt,please feel no hesitation to contact us.

roof panel roll forming machine